Thin pads with an EVA layer for long-throw DAs (M15 Pro, M21 Pro): less wobble, more control on curves and three densities by colour: green cutting, yellow polishing, red finishing.
Low profile = the pad spins better with 15 and 21 mm throws; for the M8S V2 they work just as well.
12,39 €excl. VAT
Escova de limpeza de pads6,54 €excl. VAT
View in storeStep 2 · Foam pads. Colour by function: green cuts, blue corrects, yellow polishes, red finishes and orange does it all in one step. High profile for rotary and DA, low profile for long-throw DAs and cross-cut for less sling. In 5.2" and 6.2" for 5" and 6" plates.
The pad should be slightly larger than the plate: 5.2" pads for 5" plates and 6.2" pads for 6" plates. High profile works on rotary and DA and is more forgiving on curves; low profile (with an EVA layer) is more stable on long-throw DAs (15 and 21 mm) because it wobbles less. Cross-cut holds more compound and slings less.
While working, clean with the pad brush after every panel. At the end of the day wash in warm water with pad cleaner, squeeze without twisting and dry hook side up, ideally on the wall holder. A well-kept pad handles dozens of cars; replace it when the foam tears, loses density or the hook-and-loop stops gripping.
No: it is a complement. At 0.96 kg, 80 W and 1" to 3" pads, it polishes wheels, door handles, pillars, consoles and badges without a cable. For panels, a 15 or 21 mm DA. The included battery gives 35 to 45 minutes of continuous work.
12,39 €excl. VAT
High-profile foam with a centre cut and tapered edge to dissipate heat: the pad for removing deep scratches, sanding marks and oxidation with cutting compound, on DA or rotary.
Backing plates, pads and consumables
12,39 €excl. VAT
The everyday cutting pad: removes swirls and moderate scratches with cutting or one-step compound, leaving fewer marks to refine.
Backing plates, pads and consumables
11,74 €excl. VAT
Medium foam for refining polish: removes the cutting marks, brings back depth and prepares the paint for protection.
Backing plates, pads and consumables
11,41 €excl. VAT
Soft foam for the last step and for applying waxes, sealants and glazes by machine without abrasion.
Backing plates, pads and consumables
